Teradek Serv Pro
Serv Pro is a hardware streaming device that allows up to 10 iPhones and iPads to monitor a video feed in HD over WiFi. Perfect for script supervisors, hair & makeup, classrooms, and documentary shoots, Serv Pro offers a compelling monitoring alternative to zero delay wireless video systems.
- Stream over local networks
- High definition and low latency
- Works harmoniously with Teradek Bolt and Paralinx products
- Monitor up to 4 live feeds at one time
Video
Video Inputs: 1 x SD/HD-SDI (75 Ohm BNC);1 x HDMI Type-A receptacle
Bonding
Bonding: None
Supported Input Resolutions
Supported Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60*
1080i 50/59.94/60, 1080PsF 23/24/25/29/30, 720p 50/59.94/60, 576i, 480i, 480p (for HDMI input only), 576p (for HDMI input only)
*Ingests 1080p50/59/60
Video Processing
Video Compression
H.264, Baseline, Main and High Profile
Supported Video Bitrate
250 Kbps to 15 Mbps*
*15 Mbps (wired), 10 Mbps (WiFi)
Supported Video Bitrate Details: 5 Mbps, 4 Mbps, 3 Mbps, 2.5 Mbps, 1.5 Mbps, 1 Mbps, 750 Kbps
Supported Output Resolutions 169: Configured via Vuer app: 1920×1080, 1536×864, 1280×720, 960×540, 480, 260, 270
Test Pattern Generator Support: Supports Custom Test Pattern
Video Format Conversion Support: Built in Video Scaler and Deinterlacer
Color Correction: None
Protocol Support
Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Supported Video Transport Protocols: Teradek Streaming Protocol (compatible with Teradek Apps, e.g. Live:Air, Vuer)
Remote Control: No Core Support
Software Or Platform Integration: Streaming Platforms not supported directly through device but via the Live:Air app
Audio Processing
Audio Compression: AAC-LC, MPEG Layer 2
Inputs
Audio Input: Embedded Audio Input, Analog Line or Mic in, adjustable gain
Outputs
Audio Output: No audio output
Physical
Dimensions: 4.75″W x 3″D x 1.1″H [120.7 x 76.2 x 27.9mm]
Weight: 11.6oz [328.9g]
Construction: Milled Aluminum
Interfaces
Http: WebUI for Configuration and Control
Configuration Interfaces: OLED Display with joystick Navigation buttons
, Feature-rich WebUI for configuration and control
Switches: On/Off and Reset Switch
Recording Storage: No Recording
Mobile App: Vuer, Live:Air
Usb Interface Functionality:None
Network
Ethernet: 10/100/1000 BASE-T Gigabit
Wireless: WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMo
Usb: None
Rf Channel Selection: Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only),
Configurable to specific channels
Power
Power Input: 2 Pin Connector Power input
Battery: No Battery Included
Nominal Power Consumption: 8W, 7W (no WiFi)
Auxilary Power Input: 6-28V DC
General
Mountability: Can be mounted horizontally or vertically with
1/4″ 20 mounting holes