A bright, full HD 7-inch wireless monitor with built-in Teradek receiver, Director’s Handles and Gold Mount Battery Plate.

This 3000 nit daylight viewable monitor/receiver is compatible with Teradek Bolt 500, 1000, and 3000 transmitters.

• 1920 x 1080 Resolution
• 3000 Nits Bright
• 300’ Range Wireless Receiver
• 2x SDI Input & 1x SDI Output

Display

Panel Type: IPS LCD

Resolution: 1920 x 1080

Pixel Density (PPI): 323 ppi

Aspect Ratio: 16:9

Active Area: 7.02

Brightness: 3000

Contrast: 1150:1

Color Gamut: 100% Rec 709

Color Depth: 10-Bit Color Intelligence Engine

Viewing Angle : 178 Degrees (CR<10)

Backlight Type: White LED

Viewfinder (EVF)

Variable Field of View: range

Input Signal Types/Formats

3G-SDI: YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50

HD-SDI: YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98

SD-SDI: YCC 4:2:2 @ 10-bits: 480i29.97, 576i25

Audio: SDI – Monitor through Headphone Jack – Metering up to 8 channels

Output Signal Types/Formats

3G-SDI: YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50

HD-SDI: YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98

SD-SDI: YCC 4:2:2 @ 10-bits: 480i29.97, 576i25

Audio: SDI – Incoming Audio Stream is sent downstream via SDI connection

Wireless

SDI Ancillary Data: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to: https://support.teradek.com/hc/en-us/articles/217446088

Color Sampling: For SDI: YCbCr 4:2:2, 10-bit

Supported Resolutions: 1080p60/59.94/50/30/29.97/25/24/23.98 1080psf30/29.97/25/24/23.98 1080i60/59.94/50 720p60/59.94/50 480i(NTSC)/576i(PAL)

Video Compression: Visually lossless

Audio Compression: 48KhZ 24-bit PCM

Switches: On/Off

Wireless Network: 5GHz (20&40Mhz), DFS Frequencies Available

RF Channel Selection: Auto only (NOT configurable)

Encryption: AES-129

RF Power: 15dBm EIRP

Range: Up to 300ft line of sight

Noise Rejection: Can coexist with WiFi and 5GHz cordless phones

Connector Type

SDI: 1x 3g Input, 1x 3g Output

HDMI: Not Supported

Component: Not Supported

Composite: Not Supported

Audio: 1x ⅛” Headphone Jack

Power In: 1x Locking LEMO 2-pin Connectors Power Input

USB: 1x Proprietary Locking LEMO 5-pin Connectors Power Input

Controls

Primary Control Interface: Joystick Navigation, Dedicated Back/Power Button. 5 Additional User Assignable Function Buttons

Data I/O

Storage: SD Card for LUTs, Captured Images, Image Overlays, Firmware Upgrades, Profile Saving.

USB: USB port supports storage devices for LUTs, Captured Images, Image Overlays, Profile Saving.

Power

Connector Type: 1x Locking LEMO 2-pin Connectors Power Input

Voltage: With DV Battery Plate: 6.0 – 8.4V 7.2V Nominal With High Voltage Battery Plate: 12 – 34V 14.4V Nominal With Lemo Input: 12 – 34V Max

Power Consumption: 16.7W Max Brightness (3K+ nits) w/ Wireless OFF + SDI Video Signal, 7.4W Studio Mode (200 nits) w/Wireless OFF + SDI Video Signal | 23.3W Max Brightness (3K+nits) w/ Wireless ON + Wireless Video Signal/13.8W Studio Mode (200 nits) w/ Wireless ON + Wireless Video Signal

Recommended Power Supply: Included

Overload Protection: Yes

Environmental

Compliance: FCC, CE, RoHS

Operating Temperature: 0 – 100 degrees F

Storage Temperature : -4 – 120 degrees F

Screen Protection: AR Coated Gorilla Glass Optical Bonding on Panel

Height: 9″ (22.86cm)

Width: 1.21″ (3.07cm)

Depth/Length: 8.4″ (21.34cm)

Weight (Item Only without battery): 32oz (907.18g)

Weight (Packaged): 78oz (2211.26g)

Mount Points: 1x ¼”-20 Thread on left and right side of Monitor, 7x ¼”-20 Thread on Bottom of Monitor, 7x ¼”-20 Thread on Top of Monitor

Note: 5-inches high without antennas, 9.0 with antennas

Software

Pixel Zoom (type): 2x & 4x Zoom with smooth pan via joystick

Frame Guides Yes: Preset Aspect Ratios & Customizable

DSLR Scale: Canon 5DMkii & Canon 7D

Custom Scale: Yes (Underscan Only)

Anamorphic De-Squeeze: Yes: 1.33x, 1.5x, 1.66x, 2.0x

Image Rotate(Manual/Automatic): Yes – Automatic or Manual Control

Image Flip (Manual/Automatic): Yes – Automatic or Manual Control

Focus Assist (Colors): Yes – User Adjustable Color Style and Intensity

Peaking: Yes – User Adjustable Intensity

False Color: Yes – Rainbow & Arri Style

Zebra: Yes – Dual – User Configurable

Waveform: Yes – Luma & RGB Style, Fully User Customizable w/ Region of Interest Highlighting

Vectorscope: Yes

RGB Parade: Yes – Fully User Customizable

Histogram: Yes – Luma & RGB Style

Image Capture: Yes – With Dedicated Button

Custom LUTS: Yes – Loadable as Looks on Pages or as Systemwide Color Calibration via the settings menu

LUT Downstream: Yes – Available on SDI Out. Applied on Output Preview Page.

LUT Import: via SD Card or USB Storage Device

Image Overlay: Yes with Opacity Slider and Blink Setting

Audio Meters: Yes – up to 8 channel