Teradek Bolt Pro 300 Combo HDMI HD SDI Transmitter

Rent for $75.00 per day

SKU: R-TER-10-930 Categories: ,

Description

Teradek Bolt Pro 300 Combo HDMI HD SDI receivers priced separately at $50.00/Day per receiver.

The Teradek Bolt 300 is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 300ft over the unlicensed 5GHz band. The Bolt 300 has internal antennas and is multicast capable up to 4 receivers, support timecode and metadata pass through, and include the USB 3.0 GRAB Engine.

Watch Nick Giannino on the Benefits of the Teradek Bolt Pro Wireless Video Transmission Systems.

 

Features

Specifications

VIDEO
Video resolution: Tx – 1080p60/59.94/50/30/29.97/25/24/23.98, 1080psf30/29.97/25/24/23.98, 1080i60/59.94/50, 720p60/59.94/50, 480p59.94/576p50 (via HDMI ports only), 480i(NTSC)/576i(PAL)
Color sampling: Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)
Inputs: Tx – 1 x 75 Ohm BNC, 1 x Type A receptacle HDMI; Rx – No
Outputs: Tx – 1 x 75 Ohm BNC(Loop-out); Rx – 1 x USB 3.0 micro B receptacle, 1 x 75 Ohm BNC, 1 x Type A receptacle HDMI
Delay(TX to RX): <0.001sec

AUDIO
Format support: Tx – 48kHz 24-bit PCM
Wireless Frequency: TX – Non-DFS Frequencies: US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz; EU & JP : 5.19 ~ 5.23 GHz; DFS Frequencies: US : 5.27 ~ 5.55 GHz and 5.67 GHz; EU & JP : 5.27 ~ 5.67 GHz
RF power: Tx – 17dBm EIRP; Rx – 15dBm EIRP
Range: Tx – Up to 300ft line of sight
Unicast / Multicast: Tx and Rx – Unicast/Multicast
Noise rejection: Tx – Can coexist with WiFi and 5GHz cordless phones

POWER

Input: 2-Pin Lemo 7-28 VDC for both Tx and Rx
Internal battery: No for both Tx and Rx
Consumption(1080p60): Tx – 6.5 Watts; Rx – 8.2Watts

GENERAL
LCD screen: No for both Tx and Rx
Menu joystick: Tx – No; Rx – Yes
Size: Tx – 1.06×2.61×4.42inches(27.0×66.1×112.3mm); Rx – 1.0×3.5×5.8inches(25.2×88.9×146.5mm)
Weight : Tx – 9.2oz(262g); Rx – 12.2oz(346g)
Firmware: Tx – Upgrade via Mini-USB
Operating temperature: Tx – 0 ~ 50 deg-C
Chassis material: Milled aluminum for both Tx and Rx
Mountability: Hot-shoe mount, Multiple mounting options with 1/4″ holes for both Tx and Rx

Includes

Bolt Transmitter
(2) 1/4-20 Capped Screws
(6) Washers
Noga Articulating Arm
Hotshoe Adapter
15mm Rod Clamp
AC Power Supply to XLR4F
XLR4M to 2 Pin Lemo
A/B DTap to XLR4F
(2) A/B DTap to 2 Pin Lemo

For Multi-day Rentals: Call for Rate